Hardcopy:palette - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

:HARDcopy:PALette

Command Syntax
:HARDcopy:PALette <palette>
<palette> ::= {COLor | GRAYscale | NONE}
The :HARDcopy:PALette command sets the hardcopy palette color.
The oscilloscope's print driver cannot print color images to color laser
printers, so the COLor option is not available when connected to laser
printers.
Query Syntax
:HARDcopy:PALette?
The :HARDcopy:PALette? query returns the selected hardcopy palette color.
Return Format
<palette><NL>
<palette> ::= {COL | GRAY | NONE}
See Also
•
•
•
•
•
•
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
(see page 790)
"Introduction to :HARDcopy Commands"
":HARDcopy:STARt" on page 311
":HARDcopy:FACTors"
":HARDcopy:LAYout"
":HARDcopy:FFEed"
":HARDcopy:INKSaver"
on page 299
on page 302
on page 300
on page 301
:HARDcopy Commands
on page 296
17
309