Hardcopy:palette - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

:HARDcopy:PALette

Command Syntax
:HARDcopy:PALette <palette>
<palette> ::= {COLor | GRAYscale | NONE}
The :HARDcopy:PALette command sets the hardcopy palette color.
If no printer is connected, NONE is the only valid parameter.
N O T E
Query Syntax
:HARDcopy:PALette?
The :HARDcopy:PALette? query returns the selected hardcopy palette color.
Return Format
<palette><NL>
<palette> ::= {COL | GRAY | NONE}
See Also •
•
•
•
•
•
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
(see page 658)
"Introduction to :HARDcopy Commands"
":HARDcopy:STARt" on page 255
":HARDcopy:FACTors"
":HARDcopy:LAYout"
":HARDcopy:FFEed"
":HARDcopy:INKSaver"
on page 249
on page 252
on page 250
on page 251
Commands by Subsystem
on page 246
5
253