Hardcopy:palette - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:HARDcopy:PALette

Command Syntax
:HARDcopy:PALette <palette>
<palette> ::= {COLor | GRAYscale | NONE}
The :HARDcopy:PALette command sets the hardcopy palette color.
The oscilloscope's print driver cannot print color images to color laser
printers, so the COLor option is not available when connected to laser
printers.
Query Syntax
:HARDcopy:PALette?
The :HARDcopy:PALette? query returns the selected hardcopy palette color.
Return Format
<palette><NL>
<palette> ::= {COL | GRAY | NONE}
See Also
•
•
•
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
"Introduction to :HARDcopy Commands"
":HARDcopy:STARt" on page 385
":HARDcopy:FACTors"
":HARDcopy:LAYout"
":HARDcopy:FFEed"
":HARDcopy:INKSaver"
on page 373
on page 376
on page 374
on page 375
:HARDcopy Commands
on page 370
18
383