Total.......................................... 0
show ip ospf interface
Use the show ip ospf interface command in Privileged EXEC mode to display
the information for the VLAN or loopback interface. The long form of the
command displays the configuration of flood blocking.
Syntax
show ip ospf interface [interface-type interface-number]
Syntax Description
Parameter
interface-type
interface-number
Flood Blocking
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example #1
The following example displays the information for the IFO object or virtual
interface tables associated with VLAN 3.
console#show ip ospf interface vlan 10
IP Address..................................... 1.1.1.1
Subnet Mask................................. 255.255.255.0
Secondary IP Address(es).......................
1218
OSPF Commands
Description
Vlan or loopback
Valid VLAN ID or loopback interface number (Range: 0–7).
Indicates if flood blocking is enabled or disabled.