Exec-Timeout - Dell C9000 Series Reference Manual

Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
E-Series
Related exit
Commands

exec-timeout

Set a time interval that the system waits for input on a line before disconnecting the session.
C9000 Series
Syntax
exec-timeout minutes [seconds]
To return to default settings, use the no exec-timeout command.
Parameters
minutes
seconds
Defaults 10 minutes for console line; 30 minutes for VTY lines; 0 seconds
Command Modes LINE
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series and E-Series.
Original command.
— returns to the lower command mode.
Enter the number of minutes of inactivity on the system before
disconnecting the current session. The range is from 0 to 35791.
The default is 10 minutes for the console line and 30 minutes
for the VTY line.
(OPTIONAL) Enter the number of seconds. The range is from 0
to 2147483. The default is 0 seconds.
Control and Monitoring 88