Timers Pacing Flood; Timers Pacing Lsa-Group - Dell Networking 7048 Reference Manual

timers pacing flood

Use the timers pacing flood command in router OSPF Global Configuration
mode to adjust the rate at which OSPFv2 sends LS Update packets.
Use the no form of the command to return the timer pacing to the default
value.
Syntax
timers pacing flood
no timers pacing flood
Parameter Description
Parameter
milliseconds
Default Configuration
The default pacing between LS Update packets is 33 ms.
Command Mode
OSPFv2 Global Configuration mode
User Guidelines
OSPF distributes routing information in Link State Advertisements (LSAs),
which are bundled into Link State Update (LS Update) packets. To reduce
the likelihood of sending a neighbor more packets than it can buffer, OSPF
rate limits the transmission of LS Update packets. By default, OSPF sends up
to 30 updates per second on each interface (1/the pacing interval). Use this
command to adjust the LS Update transmission rate.

timers pacing lsa-group

Use the timers pacing lsa-group command in router OSPF Global
Configuration mode to tune how OSPF groups LSAs for periodic refresh.
1234
OSPF Commands
milliseconds
Description
The average time between transmission of LS Update packets.
The range is from 5 ms to 100 ms. The default is 33 ms.