Set Rmon Stats; Clear Rmon Stats - Enterasys D-Series Cli Reference Manual

set rmon stats

Multicast Pkts
CRC Errors
Undersize Pkts
Oversize Pkts
Fragments
Table 15‐40 provides an explanation of the command output.
set rmon stats
Use this command to configure an RMON statistics entry.
Syntax
set rmon stats index port-string [owner]
Parameters
index
port‐string
owner
Defaults
If owner is not specified, monitor will be applied.
Mode
Switch command, read‐write.
Example
This example shows how to configure RMON statistics entry 2 for
D2(rw)->set rmon stats 2 ge.1.20

clear rmon stats

Use this command to delete one or more RMON statistics entries.
Syntax
clear rmon stats {index-list | to-defaults}
Parameters
index‐list
to‐defaults
Defaults
None.
15-4 RMON Configuration
= 0 128 - 255 Octets
= 0 256 - 511 Octets
= 0 512 - 1023 Octets
= 0 1024 - 1518 Octets
= 0
Specifies an index for this statistics entry.
Specifies port(s) to which this entry will be assigned.
(Optional) Assigns an owner for this entry.
Specifies one or more stats entries to be deleted, causing them to disappear
from any future RMON queries.
Resets all history entries to default values. This will cause entries to
reappear in RMON queries.
= 0
= 0
= 0
= 0
.1.20:
ge