3Com MSR 50 Series Configuration Manual page 1969

4 Verify the configuration on Router A.
# Display the traffic statistics for the main interface taking part in load sharing.
[RouterA-Serial2/0] display standby flow
Interfacename : Serial2/0
Flow-interval(s) : 30
LastInOctets : 139
LastOutOctets : 22033
InFlow(Octets) : 0
OutFlow(Octets) : 0
BandWidth(b/s) : 10000
UsedBandWidth(b/s) : 0
# Display state of the main and backup interface.
[RouterA-Serial2/0] display standby state
Interface Interfacestate
serial2/0 UP
serial2/1 STANDBY
serial2/2 STANDBY
Backup-flag meaning:
M---MAIN B---BACKUP
D---LOAD P---PULLED
# When the data traffic on the main interface Serial 2/0 exceeds 8000 kbps (that
is, 10000 kbps × 80%), the backup center enables the backup interface Serial 2/1
with a higher priority first. Then you can view the state of the main and backup
interfaces.
[RouterA-Serial2/0] display standby state
Interface Interfacestate
serial2/0 UP
serial2/1 UP
serial2/2 STANDBY
Backup-flag meaning:
M---MAIN B---BACKUP
D---LOAD P---PULLED
Backup Center Configuration Example
Standbystate Standbyflag
MUP MUD
STANDBY BU
STANDBY BU
V---MOVED U---USED
Standbystate Standbyflag
MUP MUD
STANDBY BU
STANDBY BU
V---MOVED U---USED
1969
Pri Loadstate
TO-HYPNOTIZE
30
20
Pri Loadstate
30
20