Displaying And Maintaining Voip Configuration - 3Com MSR 50 Series Configuration Manual

2278 C 132: V
HAPTER OICE
Displaying and
Maintaining VoIP
Configuration
E C
NTITY ONFIGURATION
Figure 659 Restore the parameter default of the command command to the system fixed
value
Default value set of global commands
command
Use the default
1
Voice entity
configuration
Command B
Parameter
B
Configuration Procedure
Follow these steps to configure global default voice parameters:
To do...
Enter system view
Enter voice view
Configure the default
input/output gain for all
subscriber lines
Enter voice dial program
view
Enable VAD globally as the
default
Configure the default
global codec
Configure globally the
default voice packetization
period for different codecs
n
For the default entity fax command, refer to
page 2343.
To do...
Display voice call information
Syntax
Parameter
A
2
3
A
C
Use the command...
system-view
voice-setup
default subscriber-line { receive |
transmit } gain value
dial-program
default entity vad-on
default entity compression
{ 1st-level | 2nd-level | 3rd-level |
4th-level } { g711alaw |
g711ulaw | g723r53 | g723r63 |
g726r16 | g726r24 | g726r32 |
g726r40 | g729a | g729r8 }
default entity payload-size
{ g711 | g723 | g726r16 | g726r24
| g726r32 | g726r40 | g729 }
Use the command...
display voice call-info
{ brief | mark number |
verbose }
Remarks
-
-
Optional
0 by default
-
Optional
Not enabled by default
Optional
By default, the highest
codec is g729r8, the
second highest is
g711alaw, the third
highest is g711ulaw, and
the lowest is g723r53.
Optional
20 milliseconds for a
G.711 codec, and 30
milliseconds for G.723,
G.726, and G.729 codecs
by default.
"Fax over IP Configuration" on
Remarks
Available in any view