3Com MSR 50 Series Configuration Manual page 1665

Follow these steps to configure WFQ:
To do...
Enter system view
Define a traffic behavior
and enter traffic
behavior view
Configure WFQ
Display traffic behavior
information
n
Configure that the traffic behavior of WFQ can only be associated with the default
class.
4 Configuring maximum queue length
Configure maximum queue length and the drop type is tail drop.
Follow these steps to configure maximum queue length:
To do...
Enter system view
Define a traffic behavior and
enter traffic behavior view
Configure maximum queue
length
Display traffic behavior
information
n
This command can be used only after the queue af command and queue wfq
command have been configured. Execute the undo queue af command and
undo queue wfq command, then queue-length will be deleted as well.
5 Configuring the drop type to be random drop.
Follow these steps to configure the drop type to be random drop:
To do...
Enter system view
Use the command...
system-view
traffic behavior
behavior-name
queue wfq [ queue-number
total-queue-number ]
display traffic behavior
{ system-defined |
user-defined }
[ behavior-name ]
Use the command...
system-view
traffic behavior
behavior-name
queue-length queue-length
display traffic behavior
{ system-defined |
user-defined }
[ behavior-name ]
Use the command...
system-view
Configuring Class-based Queuing
Remarks
-
Required
behavior-name: Name of the
traffic behavior. It is not allowed to
pre-define traffic behavior for the
system.
Required
Optional
The display command can be
executed in any view.
Remarks
-
Required
behavior-name: Name of the
traffic behavior. It is not
allowed to pre-define traffic
behavior for the system.
Required
Optional
The display command can be
executed in any view.
Remarks
-
1665