Voice Radius Configuration Task List - 3Com MSR 50 Series Configuration Manual

Voice RADIUS
Configuration Task
List
n
For specific configurations of the RADIUS server, refer to
page 1769.
When configuring voice RADIUS, pay attention to the sequence and the applicable
scope of configuration tasks.
The authentication function must be enabled before the authorization function
■
because the former is a prerequisite for the latter.
The AAA function differs in the enabling method and application scope
■
between one-stage dialing users and two-stage dialing users. The one-stage
dialing configuration applies to all one-stage dialing users, while the two-stage
dialing configuration applies to only the users who use a specific access
number.
The setting of the accounting function is independent of the enabling of
■
authentication and authorization functions, and the accounting function
applies to both one-stage dialing users and two-stage dialing users. Of course,
you must ensure that necessary information (including IP address of the voice
gateway, voice port number, calling number, and card number/password) is
configured on the RADIUS server.
Read through the following sections and acquaint yourself with the views, steps,
and applicable scope of all commands.
Voice RADIUS configuration tasks include the following:
Enter voice AAA client view
■
Configure the accounting method
■
Enable the AAA functions for one-stage dialing users
■
Configure a rule for saving call detail records (CDRs)
■
Configure access numbers
■
Configure a two-stage dialing process
■
Enable the AAA functions for two-stage dialing users
■
Configure the method of collecting digits of called numbers
■
Configure the number of digits in a card number and that in a password
■
Configure the number of redial attempts
■
Enable the language selection function
■
The configuration tasks for the one-stage dialing process differ from those for the
two-stage dialing process. The configuration tasks for the one-stage dialing
process apply to all one-stage dialing calls, while those for the two-stage dialing
process apply to different access numbers.
The configuration tasks common to the one-stage and two-stage dialing processes
include:

Voice RADIUS Configuration Task List

"Configuring RADIUS" on
2409