Configuring Information Center; Setting To Output System Information To A Log Host; Setting To Output System Information To The Trap Buffer - 3Com MSR 50 Series Configuration Manual

Setting to Output
System Information to a
Log Host
Setting to Output
System Information to
the Trap Buffer
To do...
Enter system view
Enable information center
Name the channel with a
specified channel number
Specify a log host and
configure the parameters
when system information is
output to the log host
Configure the source
interface through which log
information can be output to
a log host
Configure the output rules of
the system information
Configure the format of the
time stamp for log
information
To do...
Enter system view
Enable information center
Name the channel with a
specified channel number
Configure the channel
through which system
information can be output to
the trap buffer and specify the
buffer size
Configure the output rules of
the system information

Configuring Information Center

Use the command...
system-view
info-center enable
info-center channel
channel-number name
channel-name
info-center loghost host-ip
[ channel { channel-number |
channel-name } ] [ facility
local-number ] *
info-center loghost source
interface-type
interface-number
info-center source
{ module-name | default }
channel { channel-number |
channel-name } [ debug
{ level severity | state state }
* | log { level severity | state
state } * | trap { level severity
| state state }* ] *
info-center timestamp
loghost { date |
no-year-date | none }
Use the command...
system-view
info-center enable
info-center channel
channel-number name
channel-name
info-center trapbuffer
[ channel { channel-number |
channel-name } | size
buffersize ] *
info-center source
{ module-name | default }
channel { channel-number |
channel-name } [ debug
{ level severity | state state }*
| log { level severity | state
state }* | trap { level severity |
state state } * ] *
2145
Remarks
-
Optional
Enabled by default
Optional
Refer to Table 69 for default
channel names.
Required
Disabled by default with
channel 2 as the default
channel when enabled
Optional
No source interface is
configured by default, and the
system selects an interface as
the source interface
Optional
Refer to Table 71 for the
output rules of the system
information.
Optional
date by default
Remarks
-
Optional
Enabled by default
Optional
Refer to Table 69 for default
channel names.
Optional
System information is output
to the trap buffer by default
with channel 3 (known as
trapbuffer) as the default
channel and a default buffer
size of 256
Optional
Refer to Table 71 for the
output rules of the system
information.