Troubleshooting Ipv6 Bgp Configuration; No Ipv6 Bgp Peer Relationship Established - 3Com MSR 50 Series Configuration Manual

Troubleshooting IPv6
BGP Configuration
No IPv6 BGP Peer
Relationship Established
Verify the configuration
# Display MPLS LSP information on PE 1.
<PE1> display mpls lsp
--------------------------------------------------------------
LSP Information: BGP IPV6 LSP
--------------------------------------------------------------
FEC
In Label
In Interface
Vrf Name
FEC
In Label
In Interface
Vrf Name
---------------------------------------------------------------
LSP Information: LDP LSP
---------------------------------------------------------------
FEC In/Out Label
3.3.3.3/32 NULL/3
2.2.2.2/32 3/NULL
# Display the IPv6 BGP routing table on PE 1.
<PE1> display bgp ipv6 routing-table
Total Number of Routes: 4
BGP Local router ID is 2.2.2.2
Status codes: * - valid, > - best, d - damped,
h - history,
*> Network : 1::1
NextHop : FE80::E142:0:4607:1
Path : ?
PrefVal : 0
*> Network : 2::2
NextHop : ::1
Path : ?
PrefVal : 0
*>i Network : 3::3
NextHop : 3.3.3.3
Path : ?
PrefVal : 0
*>i Network : 4::4
NextHop : 3.3.3.3
Path : ?
PrefVal : 0
After the above configuration, you can ping through the IPv6 address 4::4 of CE 2
from CE 1.
Symptom
Display BGP peer information using the display bgp ipv6 peer command. The
state of the connection to the peer cannot become established.

Troubleshooting IPv6 BGP Configuration

: 1::1/128
: 1024
: -----
:
: 2::2/128
: 1025
: -----
:
In/Out IF
-/S1
S1/-
i - internal, s - suppressed
Out Label : -----
OutInterface : -----
Out Label : -----
OutInterface : -----
Vrf Name
PrefixLen : 128
LocPrf :
MED : 0
PrefixLen : 128
LocPrf :
MED : 0
PrefixLen : 128
LocPrf : 100
MED : 0
PrefixLen : 128
LocPrf : 100
MED : 0
1041