3Com MSR 50 Series Configuration Manual page 2109

Network diagram
Figure 628 Network diagram for FTPing an image file from an FTP server
FTP client
10.2.1.1/16
Device
Console
PC
Configuration procedure
# Check files on your device. Remove those redundant to ensure adequate space
for the startup file to be downloaded.
<Sysname> dir
Directory of flash:/
0 drw-
1 drw-
2 -rw- 1216
3 -rw- 1216
2540 KB total (2511 KB free)
<Sysname> delete /unreserved flash:/backup.cfg
# Download the startup file from the server.
<Sysname> ftp 10.1.1.1
Trying 10.1.1.1.
Connected to 10.1.1.1
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(10.1.1.1:(none)):abc
331 Give me your password, please
Password:
230 Logged in successfully
[ftp] binary
200 Type set to I.
[ftp] get aaa.app bbb.app
227 Entering Passive Mode (10.1.1.1,4,1).
125 BINARY mode data connection already open, transfer starting for aaa.app.
.....226 Transfer complete.
FTP: 5805100 byte(s) received in 19.898 second(s) 291.74Kbyte(s)/sec.
[ftp] bye
# Specify the main startup file for next startup with the boot-loader command
(Suppose the device in this example supports the main and backup attribute of the
startup file.).
<Sysname> boot-loader file bbb.app main
<Sysname> reboot
The startup file is updated at the system reboot.
Internet
- Dec 07 2005 10:00:57
- Jan 02 2006 14:27:51
Jan 02 2006 14:28:59
Jan 02 2006 16:27:26
Configuring the FTP Client
FTP server
10.1.1.1/16
filename
logfile
config.cfg
backup.cfg
2109