Configuring Call Progress Tones; Configuration Prerequisites; Specifying The Call Progress Tones Of A Country; Customizing Call Progress Tones For A Country - 3Com MSR 50 Series Configuration Manual

2250 C 131: V
HAPTER OICE
Configuring Call
Progress Tones
Configuration
Prerequisites
Specifying the Call
Progress Tones of a
Country
Customizing Call
Progress Tones for a
Country
S L C
UBSCRIBER INE ONFIGURATION
The router is equipped with FXS, FXO, E&M, VE1, and VT1 interface cards.
Follow these steps to specifying the call progress tones of a country:
To do...
Enter system view
Enter voice view
Specify the call
progress tones of a
country
Configure the level
parameter for the call
progress tones
n
The configuration of the cptone country-type command will take effect on all
voice ports of all cards on the device.
When the call progress tones of a country cannot meet the requirements, you can
customize them.
Table 76 Follow these steps to customize call progress tones for a country:
To do...
Enter system view
Enter voice view
Customize call progress
tone parameters
Configure the device to
play the customized call
progress tones
Configure the level
parameters for the
customized call
progress tones
Use the command...
system-view
voice-setup
cptone country-type locale
cptone tone-type { all |
busy-tone | congestion-tone
| dial-tone | ringback-tone |
special-dial-tone |
waiting-tone } amplitude
value
Use the command...
system-view
voice-setup
vi-card cptone-custom
{ busy-tone | congestion-tone |
dial-tone | ringback-tone |
special-dial-tone | waiting-tone }
comb freq1 freq2 time1 time2 time3
time4
cptone country-type CS
cptone tone-type { all | busy-tone
| congestion-tone | dial-tone |
ringback-tone | special-dial-tone |
waiting-tone } amplitude value
Remarks
-
-
Required
By default, the call progress tones of
China are specified.
Optional
By default, the amplitude of busy
tone and congestion tone is 1000,
that of dial tone and special dial tone
is 400, and that of ringback tone and
waiting tone is 600.
Remarks
-
-
Required
By default, no call progress
tones are customized.
Required
Optional
By default, the amplitude of
busy tone and congestion
tone is 1000, that of dial tone
and special dial tone is 400,
and that of ringback tone and
waiting tone is 600.