Displaying And Maintaining Qos Policy - 3Com MSR 50 Series Configuration Manual

Displaying and
Maintaining QoS
Policy
[Sysname-Ethernet1/0] qos apply policy test_policy inbound
After the above configuration, you can execute the display command in any view
to view the running status of QoS policy and verify the result of the configuration.
Follow these steps to display and maintain QoS policy
To do...
Display configuration information of specified
class of specified policy and behavior associated
with these classes
Display policy configuration information and
operating condition on specified or all interfaces
Display the configured traffic behavior
information
Display the configured class information

Displaying and Maintaining QoS Policy

Use the command...
display qos policy { system-defined |
user-defined } [ policy-name [ classifier
tcl-name ] ]
display qos policy interface
[ interface-type interface-number ]
[ inbound | outbound ]
display traffic behavior
{ system-defined | user-defined }
[ behavior-name ]
display traffic classifier
{ system-defined | user-defined }
[ tcl-name ]
1647