Setting Timers Regarding Hwtacacs Servers; Displaying And Maintaining Aaa/Radius/Hwtacacs - 3Com MSR 50 Series Configuration Manual

1780 C 93: AAA/RADIUS/HWTACACS C
HAPTER
Setting Timers
Regarding HWTACACS
Servers
Displaying and
Maintaining
AAA/RADIUS/HWTAC
ACS
Displaying and
Maintaining AAA
ONFIGURATION
Follow these steps to set timers regarding TACACS servers:
To do...
Enter system view
Create a HWTACACS scheme
and enter HWTACACS
scheme view
Set the TACACS server
response timeout timer
Set the quiet timer for the
primary server
Set the real-time accounting
interval
n
For real-time accounting, a NAS must transmit the accounting information of
■
online users to the HWTACACS accounting server periodically. Note that if the
device does not receive any response to the information, it does not disconnect
the online users forcibly
The real-time accounting interval must be a multiple of 3.
■
The setting of the real-time accounting interval somewhat depends on the
■
performance of the NAS and the HWTACACS server: a shorter interval requires
higher performance.
To do...
Display the configuration
information of a specified ISP
domain or all ISP domains
Display information about
specified or all user
connections
Display information about all
local users
Use the command...
system-view
hwtacacs scheme
hwtacacs-scheme-name
timer response-timeout
seconds
timer quiet minutes
timer realtime-accounting
minutes
Use the command...
display domain [ isp-name ]
display connection [ access-type
{ dot1x | mac-authentication | portal }
| domain isp-name | interface
interface-type interface-number | ip
ip-address | mac mac-address |ucibindex
ucib-index | user-name user-name | vlan
vlan-id ]
display local-user [ idle-cut { disable |
enable } | service-type { ftp |
lan-access | pad | ppp | ssh | telnet |
terminal } | state { active | block } |
user-name user-name | vlan vlan-id ]
Remarks
-
Required
By default, no HWTACACS
scheme is created.
Optional
5 seconds by default
Optional
5 minutes by default
Optional
12 minutes by default
Remarks
Available in any
view
Available in any
view
Available in any
view