Controlling Acsei Client - 3Com MSR 50 Series Configuration Manual

2204 C 126: ACSEI C
HAPTER

Controlling ACSEI Client

ONFIGURATION
Figure 643 Service interface for ACSEI client default startup
4 Move the cursor to acseid, and use the Space key to choose:
[ * ] specifies that when started up, the system automatically startup ACSEI
■
client.
[ ] specifies that when started up, the system does not startup ACSEI client
■
automatically.
5 Check you choice, use the Tab key to move the cursor to OK, press the Enter key,
then you will return to the previous view, and then choose Quit to quit the Setup
interface.
To do...
Switch to the Linux system
of the OAP module from
the command line interface
of the device
Start up ACSEI client
Load the ACSEI client
configuration file
Restart ACSEI client
Restart ACSEI client
conditionally
Use the command...
oap connect slot
slot-number
service acseid start
service acseid reload
service acseid restart
service acseid
condrestart
Remarks
Required
Available in user view
Optional
By default, the ASCEI client on the
OAP module is started.
This operation is available in the
Linux system of the OAP module.
Optional
This operation is available in the
Linux system of the OAP module.
Optional
This operation is available in the
Linux system of the OAP module.
Optional
This operation is available in the
Linux system of the OAP module.