Troubleshooting
Routing Policy
Configuration
IPv4 Routing
Information Filtering
Failure
IPv6 Routing
Information Filtering
Failure
Symptom
Filtering routing information failed, while routing protocol runs normally.
Analysis
At least one item of the IP prefix list should be configured as permit mode, and at
least one node in the Route-policy should be configured as permit mode.
Processing procedure
1 Use the display ip ip-prefix command to display IP prefix list information.
2 Use the display route-policy command to display routing policy information.
Symptom
Filtering routing information failed, while routing protocol runs normally.
Analysis
At least one item of the IPv6 prefix list should be configured as permit mode, and
at least one node of the Route-policy should be configured as permit mode.
Processing procedure
1 Use the display ip ipv6-prefix command to display IP prefix list information.
2 Use the display route-policy command to display routing policy information.
Troubleshooting Routing Policy Configuration
1005