Vam Client Configuration Task List; Creating A Vam Client; Specifying An Interval For Resending A Vam Packet; Specifying The Primary Vam Server - 3Com MSR 50 Series Configuration Manual

3com msr 30-16: software guide
Hide thumbs Also See for MSR 50 Series:
Table of Contents

Advertisement

1566
C
80: DVPN C
HAPTER
VAM Client
Configuration Task List

Creating a VAM Client

Specifying an Interval
for Resending a VAM
Packet
n
Specifying the Primary
VAM Server
ONFIGURATION
Perform the tasks described in the following sections to configure the VAM client:
Task
"Creating a VAM Client" on page 1566
"Specifying an Interval for Resending a VAM Packet" on page 1566
"Specifying the Primary VAM Server" on page 1566
"Specifying the Secondary VAM Server" on page 1567
"Creating a Local User and Password" on page 1567
"Specifying the VPN Domain of the VAM Client" on page 1567
"Specifying the Pre-Shared Key of the VAM Client" on page 1567
"Enabling the VAM Client" on page 1568
Follow these steps to create a VAM Client
To do...
Enter system view
Create a VAM client and enter
its view
If a client sends a VAM protocol packet to the server but receives no response in a
specified period of time, it retransmits the packet. A VAM protocol packet can be
an initialization request, initialization complete notification, registration request,
authentication request, or address resolution packet.
Follow these steps to specify an interval for resending a VAM packet:
To do...
Enter system view
Enter VAM client view
Specify an interval for
resending a VAM packet
The maximum number of attempts to retransmit a VAM protocol packet is always
3; it is modifiable.
Follow these steps to specify the public IP address and UDP port number of the
primary VAM server:
To do...
Enter system view
Enter VAM client view
Specify the public network IP
address and UDP port number
of the primary VAM server
Use the command...
system-view
vam client name
client-name
Use the command...
system-view
vam client name
client-name
resend interval time-interval Optional
Use the command...
system-view
vam client name
client-name
server primary ip-address
ip-address [ port
port-number ]
Remarks
Required
Optional
Required
Optional
Optional
Required
Required
Required
Remarks
-
Required
No client is created by default.
Remarks
-
-
5 seconds by default
Remarks
-
-
Required
Not specified by default

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents