Enabling Authorization Function For Two-Stage Dialing Users - 3Com MSR 50 Series Configuration Manual

2416 C 139: V
HAPTER OICE
n
Enabling Authorization
Function for Two-Stage
Dialing Users
RADIUS C
ONFIGURATION
Configuration prerequisites
You have configured an access number.
Configuration procedure
Follow these steps to enable the authentication function for two-stage dialing
users:
To do...
Enter system view
Enter voice view
Enter dial program view
Enter access number view
Enable the authentication
function for two-stage dialing
users
The authentication function for two-stage dialing users is enabled for a specific
access number, while the authentication function for one-stage dialing users is
enabled in voice AAA client view.
Before enabling the authorization function, you must ensure that:
The RADIUS server and the RADIUS client can communicate with each other at
■
the network layer.
Access numbers have been configured and the authentication function has
■
been enabled on the RADIUS server.
A list of user authorities as well as authorization policies has been configured
■
on the RADIUS server.
Configuration prerequisites
You have configured an access number.
Before enabling the authorization function, you must ensure that the RADIUS
server and the RADIUS client can communicate with each other at the network
layer and that a list of corresponding two-stage dialing users as well as
authorization policies has been configured on the RADIUS server.
Authentication is a prerequisite for authorization. The authentication function
must be enabled before the authorization function. If the authentication function
is disabled, the authorization function will automatically be disabled. In terms of
command configuration steps, the authorization command follows the
authentication command. If the authentication function is actually not enabled,
the authorization command is unavailable.
Configuration procedure
Follow these steps to enable the authorization function for two-stage dialing
users:
Use the command...
system-view
voice-setup
dial-program
gw-access-number
access-number
authentication
Remarks
-
-
-
-
Required
Disabled by default.