Configuring Voice Radius; Configuring Accounting Method; Enabling The Accounting Function For One-Stage Dialing Users - 3Com MSR 50 Series Configuration Manual

Configuring Voice
RADIUS
Configuring Accounting
Method
Enabling the Accounting
Function for One-Stage
Dialing Users
Task
"Enabling Language Selection Function" on page 2419
The RADIUS client (voice gateway) processes RADIUS Accounting requests and
responses in multiple ways. The RADIUS client sends accounting messages to the
RADIUS server in different ways at different accounting time. You can select the
required accounting method by setting the processing method of RADIUS
accounting requests and responses. The accounting method applies to one-stage
dialing and two-stage dialing.
Configuration prerequisites
A voice interface card (for example, an FXS interface card) is inserted in the router.
Configuration procedure
Follow these steps to configure an accounting method:
To do...
Enter system view
Enter voice view
Enter voice AAA client view
Configure an accounting
method
For one-stage dialing users, there is no access number. It is impossible to enable
the accounting function for an individual user according to the identification.
Therefore, the accounting function can only be enabled for all one-stage dialing
users.
Before enabling the accounting function, you must ensure that the RADIUS server
and RADIUS client (voice gateway) can communicate with each other at the
network layer and that a list of one-stage dialing users as well as accounting
policies has been configured on the RADIUS server.
Configuration prerequisites
A voice interface card (for example, an FXS interface card) is inserted in the router.
Configuration procedure
Follow these steps to enable the accounting function for one-stage dialing users:
To do...
Enter system view
Enter voice view
Enter voice AAA client view
Use the command...
system-view
voice-setup
aaa-client
acct-method { start-ack |
start-no-ack | stop-only }
Use the command...
system-view
voice-setup
aaa-client

Configuring Voice RADIUS

Remarks
Optional
Remarks
-
-
-
Required
start-no-ack by default.
Remarks
-
-
-
2411