Displaying And Maintaining Nqa; Nqa Configuration Examples; Icmp-Echo Test Configuration Example - 3Com MSR 50 Series Configuration Manual

2030 C 109: NQA O
HAPTER
Displaying and
Maintaining NQA
NQA Configuration
Examples
ICMP-echo Test
Configuration Example
VERVIEW
c
CAUTION: After an NQA test group is scheduled, you cannot enter the test group
view or test type view.
To do...
Display NQA test operation information
Display NQA server status
Network requirements
Use the NQA ICMP function to test whether the NQA client (Device A) can send
packets to the specified destination (Device B) and test the roundtrip time of
packets.
Network diagram
Figure 598 Network diagram for the ICMP-echo test
NQA client
10 .1.1.1/16
Device A
Configuration procedure
# Create an ICMP-echo test group and configure related test parameters.
<DeviceA> system-view
[DeviceA] nqa entry admin test
[DeviceA-nqa-admin-test] type icmp-echo
[DeviceA-nqa-admin-test-icmp-echo] destination ip 10.2.2.2
# Configure optional parameters.
[DeviceA-nqa-admin-test-icmp-echo] probe count 10
[DeviceA-nqa-admin-test-icmp-echo] probe timeout 500
[DeviceA-nqa-admin-test-icmp-echo] quit
# Enable the ICMP-echo test operation.
[DeviceA] nqa schedule admin test start-time now lifetime forever
# Display results of an ICMP-echo test.
[DeviceA] display nqa result admin test
NQA entry(admin admin, tag test) test results:
Destination IP address: 10.2.2.2
Send operation times: 10
Min/Max/Average round trip time: 0/16/1
Square-Sum of round trip time: 256
Last succeeded probe time: 2007-03-14 17:21:07.8
Use the command...
display nqa { result | history } [ admin-name
operation-tag ]
display nqa server status
10 .2 .2.2/16
IP network
Device B
Receive response times: 10