Configuring The Http Test - 3Com MSR 50 Series Configuration Manual

2020 C 109: NQA O
HAPTER
Configuring the HTTP
Test
VERVIEW
the FTP server. For the FTP server configuration, refer to "FTP Configuration" on
page 2105.
Configuring the FTP test
Follow these steps to configure the FTP test:
To do...
Enter system view
Enter NQA test group view
Configure the test type as TCP
and enter test type view
Configure the destination
address for a test operation
Configure the source IP
address of a probe request
Configure the operation type
Configure a login username
Configure a login password
Specify a file to be transferred
between the FTP server and
the FTP client
Configure common optional
parameters
The HTTP test is used to test the connection with a specified HTTP server and the
time required to obtain data from the HTTP server.
Configuration prerequisites
Before performing an HTTP test, you need to configure the HTTP server.
Use the command...
system-view
nqa entry admin-name
operation-tag
type ftp
destination ip ip-address
source ip ip-address
operation { get | put }
username name
password password
filename file-name
Refer to "Configuring
Optional Parameters Common
to an NQA Test Group" on
page 2028
Remarks
-
-
Required
Required
By default, no destination IP
address is configured for a
test operation.
The destination IP address for
a test operation is the IP
address of the FTP server.
Required
By default, no source IP
address is specified.
The source IP address must be
that of an interface on the
device and the interface must
be up. Otherwise, the test will
fail.
Optional
By default, the operation type
for the FTP is get, that is,
obtaining files from the FTP
server.
Required
By default, no login username
is configured.
Required
By default, no login password
is configured.
Required
By default, no file is specified.
Optional