Displaying And Maintaining Voice Radius; Voice Radius Configuration Example; Card Number/Password Process Configuration - 3Com MSR 50 Series Configuration Manual

2420 C 139: V
HAPTER OICE
Displaying and
Maintaining Voice
RADIUS
Voice RADIUS
Configuration
Example
Card Number/Password
Process Configuration
RADIUS C
ONFIGURATION
To do...
Display voice RADIUS call history
records
Display all voice RADIUS
configurations
Display statistics of messages
exchanged between voice
RADIUS module, external call
control module, and AAA
module.
Clear the statistics of messages
exchanged between the voice
RADIUS module, call
management center (CMC)
module, and AAA module
Network requirements
Local telephone users are connected to voice subscriber lines of routers directly or
via PBXs. The routers are connected to the IP network via WAN ports. The RADIUS
server is deployed on the IP network. The number of digits in a card number is 10
and that in a password is 4.
The access number is 12345. Authentication, authorization, and accounting are
required for users who dial this access number. The maximum number of redial
attempts is 3, that is, the maximum number of dial attempts is 4.
When making an IP call, users first dial the access number 12345, then select a
language option and enter a card number and password as prompted, and finally
dial the called number if the card number/password authentication succeeds.
Use the command...
display voice call-history-record { all |
callednumber called-number |
callingnumber calling-number |
cardnumber card-number |
remote-ip-addr ip-address | last
last-number | line line-number }
display voice access-number
display voice radius statistic
reset voice radius statistic
Remarks
In any view
In any view
In any view
In user view