Configuring Pots Entity; Configuration Task List; Configuration Prerequisites; Creating Pots Entity - 3Com MSR 50 Series Configuration Manual

2266 C 132: V
HAPTER OICE
Configuration Task
List
Configuring POTS
Entity

Configuration Task List

Configuration
Prerequisites

Creating POTS Entity

E C
NTITY ONFIGURATION
POTS entity. This type of voice entity corresponds to the local telephone or
■
PSTN side. POTS entity configuration is required to establish connections
between physical voice subscriber-lines and local telephone devices.
VoIP entity. This type of entity maps telephone numbers with IP addresses.
■
Contrasted to POTS entity, it resides at the IP side.
The voice entity configuration involves the following tasks:
Task
"Creating POTS Entity" on page 2266
"Configuring VoIP Entity" on page 2271
"Configuring Voice Performance" on page 2275
"Resetting a Voice Card" on page 2276
"Configuring Global Default Voice Parameters" on page
2276
Complete the following tasks to configure a POTS entity:
Task
"Creating POTS Entity" on page 2266
"Configuring Basic Functions" on page 2251
"Configuring Local POTS Entity to Play Ringback Tones" on
page 2268
"Configuring DTMF Transmission" on page 2269
"Enabling VAD" on page 2269
"Configuring Options Related to Dial Plan" on page 2261
Log in to the router equipped with a voice card (for example, an FXS interface
card) and enter user view.
Follow these steps to create a POTS entity:
To do...
Enter system view
Enter voice view
Enter voice dial program view
Create POTS entity and enter POTS entity
view
Remarks
Required
Required
Optional
Optional
Optional
Remarks
Required
Required
Optional
Optional
Optional
Optional
Use the command... Remarks
system-view -
voice-setup -
dial-program -
entity entity-number Required
pots