3Com MSR 50 Series Configuration Manual page 2000

2000 C 107: VRRP C
HAPTER ONFIGURATION
Preempt Mode
Auth Type
Track IF
Virtual IP
Virtual MAC
Master IP
# Display detailed information of standby group 1 on Router B.
[RouterB-Ethernet1/0] display vrrp ipv6 verbose
IPv6 Standby Information:
Run Method
Virtual IP Ping : Enable
Interface
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Master IP
The above information indicates that in standby group 1 Router A is the master,
Router B is the backup and packets sent from Host A to Host B are forwarded by
Router A.
If Router A is in work, but its interface Ethernet 1/1 is not available, you can still
ping through Host B on Host A. You can use the display vrrp ipv6 command to
view the detailed information of the standby group.
# If Router A is in work, but its interface Ethernet 1/1 is not available, the detailed
information of standby group 1 on Router A is displayed.
[RouterA-Ethernet1/0] display vrrp ipv6 verbose
IPv6 Standby Information:
Run Method
Virtual IP Ping : Enable
Interface
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Track IF
Virtual IP
Master IP
# If Router A is in work, but its interface Ethernet1/1 is not available, the detailed
information of standby group 1 on Router B is displayed.
[RouterB-Ethernet1/0] display vrrp ipv6 verbose
IPv6 Standby Information:
Run Method
Virtual IP Ping : Enable
Interface
VRID
Admin Status
: YES
: SIMPLE TEXT
: Ethernet1/1
: FE80::10
: 0000-5e00-0201
: FE80::1
: VIRTUAL-MAC
: Ethernet1/0
: 1
: UP
: 100
: YES
: SIMPLE TEXT
: FE80::10
: FE80::1
: VIRTUAL-MAC
: Ethernet1/0
: 1
: UP
: 110
: YES
: SIMPLE TEXT
: Ethernet1/1
: FE80::10
: FE80::2
: VIRTUAL-MAC
: Ethernet1/0
: 1
: UP
Delay Time : 5
Key : hello
Pri Reduced : 30
Adver. Timer : 500
State : Backup
Run Pri : 100
Delay Time : 5
Key : hello
Adver. Timer : 500
State : Backup
Run Pri : 80
Delay Time : 5
Key : hello
Pri Reduced : 30
Adver. Timer : 500
State : Master