Configuring Frame Relay Traffic Shaping - 3Com MSR 50 Series Configuration Manual

Configuring Frame Relay
Traffic Shaping
To do...
Associate a Enter Frame Relay interface
Frame Relay view
class with a
Frame Relay
Associate a Frame Relay
interface
class with a Frame Relay
interface
Associate a Enter Frame Relay interface
Frame Relay view
class with a
Frame Relay
Enter FR PVC view
PVC
Associate a Frame Relay
class with a Frame Relay
PVC
n
After creating the Frame Relay class using fr class command, the user will
■
enter the Frame Relay class view under which you can configure the
parameters like CIR.
In Frame Relay class view, the user can configure the parameters for the QoS,
■
such as Frame Relay traffic shaping, Frame Relay traffic policing, Frame Relay
congestion management, and Frame Relay queuing management. The
following sections will cover the parameter settings in detail.
Follow these steps to configure Frame Relay traffic shaping:
To do...
Enter system view
Enter synchronous interface
view
Enable Frame Relay traffic
shaping
Exit synchronous interface
view
Enter Frame Relay class view fr class class-name
Set the CBS of a Frame
Relay PVC
Set the CBS of a Frame
Relay PVC
Set the CIR ALLOW of a
Frame Relay PVC
Set the CIR of a Frame Relay
PVC
Use the command...
interface
interface-type
interface-number
fr-class class-name
interface
interface-type
interface-number
fr dlci dlci
fr-class class-name
Use the command...
system-view
interface interface-type
interface-number
fr traffic-shaping
quit
cbs [ outbound ]
committed-burst-size
ebs [ outbound ]
excess-burst-size
cir allow [ outbound ]
committed-information-rate
cir committed-information-rate
Configuring Frame Relay QoS
Remarks
Use either command or
all commands.
By default, no Frame
Relay class is associated
with any Frame Relay
PVC.
Remarks
-
-
Required
By default, the Frame Relay
traffic shaping is not enabled
on the interface.
-
-
Optional
The value is 56000 bps by
default.
Optional
The value is 0 bps by default.
Optional
The value is 56000 bps by
default.
Optional
The value is 56000 bps by
default.
1717