Example For Configuring Multi-Role Host - 3Com MSR 50 Series Configuration Manual

1538 C 79: MPLS L3VPN C
HAPTER
Example for Configuring
Multi-Role Host
ONFIGURATION
Issuing the display ip routing-table vpn-instance command on PE 3 and PE 4,
you should see that the routes of the remote VPN customers are present in the
VPN routing tables. Takes PE 3 as an example:
[PE3] display ip routing-table vpn-instance vpn1
Routing Tables: vpn1
Destinations : 3
Destination/Mask
100.1.1.0/24
100.1.1.2/32
120.1.1.0/24
PE 3 and PE 4 should be able to ping each other:
[PE3] ping 20.1.1.2
PING 20.1.1.2: 56
Reply from 20.1.1.2: bytes=56 Sequence=1 ttl=252 time=127 ms
Reply from 20.1.1.2: bytes=56 Sequence=2 ttl=252 time=97 ms
Reply from 20.1.1.2: bytes=56 Sequence=3 ttl=252 time=83 ms
Reply from 20.1.1.2: bytes=56 Sequence=4 ttl=252 time=70 ms
Reply from 20.1.1.2: bytes=56 Sequence=5 ttl=252 time=60 ms
--- 20.1.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 60/87/127 ms
CE 3 and CE 4 should be able to ping each other:
[CE3] ping 120.1.1.1
PING 120.1.1.1: 56
Reply from 120.1.1.1: bytes=56 Sequence=1 ttl=252 time=102 ms
Reply from 120.1.1.1: bytes=56 Sequence=2 ttl=252 time=69 ms
Reply from 120.1.1.1: bytes=56 Sequence=3 ttl=252 time=105 ms
Reply from 120.1.1.1: bytes=56 Sequence=4 ttl=252 time=88 ms
Reply from 120.1.1.1: bytes=56 Sequence=5 ttl=252 time=87 ms
--- 120.1.1.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 69/90/105 ms
Network requirements
Host A is connected to CE 1. Its IP address is 100.1.1.2 and it can access VPN 1
■
and VPN 2.
Bind interface Serial 2/1 of PE 1 to VPN instance vpn1, and interface Serial 2/0
■
of PE 2 to VPN instance vpn2.
Routes : 3
Proto Pre Cost
Direct 0 0
Direct 0 0
BGP 255 0
data bytes, press CTRL_C to break
data bytes, press CTRL_C to break
NextHop Interface
100.1.1.2 Eth1/0
127.0.0.1 InLoop0
6.6.6.9 NULL0