2300
C
133: D
HAPTER
IAL
Configuring Number
Substitution for A Voice
Subscriber Line
Configuring Number
Sending Mode
Configuration
Prerequisites
Configuration Procedure
P
C
LAN
ONFIGURATION
Follow these steps to configure number substitution for a subscriber line:
To do...
Enter system view
Enter voice view
Enter voice dial program view dial-program
Create a number substitution
rule list and enter voice
number-substitute view
Configure a dot-match rule
Configure a number
substitution rule
Configure a preferred number
substitution rule
Enter voice subscriber line
view
Configure a number
substitution rule list for a
subscriber line
n
Whatever number substitution mode configured, the system performs number
substitution only once on a given number.
You can configure a number sending mode to control the originating gateway
how to send a called number. Currently, three number sending modes are
available:
Send the least significant digits (configured by the send-number digit-number
■
command) of a called number
Sends all digits of a called number
■
Send a truncated called number. When the match-template command
■
configured for a voice entity ends in a wildcard, only the digits that match the
wildcard are sent.
The required basic configurations have been completed on POTS, VoIP, and VoFR
entities.
Follow these steps to configure a number sending mode:
Use the command...
system-view
voice-setup
number-substitute
list-number
dot-match { end-only |
left-right | right-left }
rule rule-tag input-number
output-number
[ number-type
input-number-type
output-number-type |
numbering-plan
input-numbering-plan
output-numbering-plan ] *
first-rule rule-number
subscriber-line line-number
substitute { called | calling }
list-number
Remarks
-
-
-
-
Optional
By default, the dot match rule
is end-only.
Optional
By default, no number
substitution rule is configured.
Optional
By default, no preferred
number substitution rule is
configured.
-
Optional
By default, no number
substitution rule list is
configured for a subscriber
line