3Com MSR 50 Series Configuration Manual page 2126

3com msr 30-16: software guide
Hide thumbs Also See for MSR 50 Series:
Table of Contents

Advertisement

2126
C
118: B
HAPTER
ASIC
C
ONFIGURATIONS
To do...
Set the time zone
Set a daylight
summer time scheme
Display the system clock
The system clock is displayed by system time stamp, which is the same as that
displayed by the display clock command. The system clock is decided by the
commands clock datetime, clock timezone and clock summer-time. If these
three commands are not configured, the display clock command displays the
original system clock. If you combine these three commands in different ways, the
system clock is displayed in the ways shown in
parameters in the configuration column are as follows:
1 indicates date-time has been configured with the clock datetime.
2 indicates time-zone has been configured with the clock timezone command
and the offset time is zone-offset.
3 indicates summer time has been configured with the clock summer-time
command and the offset time is summer-offset.
[1] indicates the clock datetime command is an optional configuration.
The default system clock is 2005/1/1 1:00:00 in the example.
Table 61 Relationship between the configuration and display of the system clock
Configuration
1
2
1 and 2
[1], 2 and 1
Use the command...
clock timezone zone-name { add |
minus } zone-offset
clock summer-time zone-name one-off
start-time start-date end-time end-date
add-time
clock summer-time zone-name
repeating start-time start-date end-time
end-date add-time
System clock displayed by the
display clock command
date-time
The original system clock ±
zone-offset
date-time ± zone-offset
date-time
Remarks
Optional
Available in user view.
Optional
Available in user view.
Table
61. The meanings of the
Example
Configure: clock datetime 1:00
2007/1/1
Display: 01:00:00 UTC Mon
01/01/2007
Configure: clock timezone
zone-time add 1
Display: 02:00:00 zone-time Sat
01/01/2005
Configure: clock datetime 2:00
2007/2/2 and clock timezone
zone-time add 1
Display: 03:00:00 zone-time Fri
02/02/2007
Configure: clock timezone
zone-time add 1 and clock
datetime 3:00 2007/3/3
Display: 03:00:00 zone-time Sat
03/03/2007

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents