3Com MSR 50 Series Configuration Manual page 2400

2400 C 138: V FR C
HAPTER O ONFIGURATION
[RouterA-Serial2/0] fr dlci 100
[RouterA-fr-dlci-Serial2/0-100] fr-class vofr
# Specify the call control protocol to be used by DLCI 100 as Huawei-compatible
(DCE).
[RouterA-fr-dlci-Serial2/0-100] vofr huawei-compatible dce
[RouterA-fr-dlci-Serial2/0-100] quit
[RouterA-Seria12/0] quit
# Configure the VoFR entity (9) for the FRF.11 trunk.
[RouterA] voice-setup
[RouterA-voice] dial-program
[RouterA-voice-dial] entity 9 vofr
[RouterA-voice-dial-entity9] match-template 9
[RouterA-voice-dial-entity9] call-mode static
[RouterA-voice-dial-entity9] address vofr-static serial 2/0 100 6
[RouterA-voice-dial-entity9] trunk-id 0101001
[RouterA-voice-dial-entity9] quit
# Configure the local POTS entity (0101001).
[RouterA-voice-dial] entity 1001 pots
[RouterA-voice-dial-entity1001] match-template 0101001
[RouterA-voice-dial-entity1001] line 3/0
2 Configure Router B.
# Create a new frame relay class "VoFR" and set the maximum amount of voice
bandwidth.
<RouterB> system-view
[RouterB] fr class vofr
[RouterB-fr-class-vofr] voice bandwidth 32000 reserved
[RouterB-fr-class-vofr] quit
# Enter interface Serial 1/0 view and configure the encapsulation format.
[RouterB] interface serial 1/0
[RouterB-Serial1/0] link-protocol fr ietf
# Enter DLCI 100 view and set the frame relay class to VoFR for DLCI.
[RouterB-Serial1/0] fr dlci 100
[RouterB-fr-dlci-Serial1/0-100] fr-class vofr
# Specify the call control protocol to be used by DLCI 100 as Huawei-compatible
(DTE).
[RouterB-fr-dlci-Serial1/0-100] vofr huawei-compatible dte
[RouterB-fr-dlci-Serial1/0-100] quit
[RouterB-Serial1/0] quit
# Configure the VoFR entity (8) for the FRF.11 trunk.
[RouterB] voice-setup
[RouterB-voice] dial-program