Configuring Call Forwarding; Configuration Prerequisites; Enabling/Disabling Call Forwarding Using Keys; Configuring Call Forwarding Using Command Lines - 3Com MSR 50 Series Configuration Manual

2430 C 140: C
HAPTER ALL
Configuring Call
Forwarding
Configuration
Prerequisites
Enabling/Disabling Call
Forwarding Using Keys
Configuring Call
Forwarding Using
Command Lines
S C
ERVICES ONFIGURATION
<Sysname>system-view
[Sysname]voice-setup
[Sysname-voice]subscriber-line 1/0
[Sysname-voice-line1/0]call-hold enable
The device supports four different types of call forwarding, which basically cover
all scenarios.
The device supports two call forwarding configuration methods:
Users perform configurations by using keys on a telephone terminal.
■
The system administrator performs configurations by using command lines on
■
the device.
The router is equipped with an FXS voice interface card.
Use the following keys to enable/disable a type of call forwarding:
Enable keys
*57*number#
*40*number#
*41*number#
*60*number#
n
Currently, the device supports the call forwarding configuration for the FXS voice
subscriber line on telephone terminals. After you enable call forwarding on a
telephone, you can view the corresponding operation result by using the display
this command in voice subscriber line view.
n
In practice, you should set a reasonable, valid forwarded-to number and avoid
setting the forwarded-to number to a wrong number or the original called
number.
Enabling call forwarding unconditional
Follow these steps to enable call forwarding unconditional:
To do...
Enter system view
Enter voice view
Enter voice subscriber line
view
Disable keys Remarks
#57# Enable/disable call forwarding unconditional.
"number" represents a forwarded-to number.
#40# Enable/disable call forwarding busy. "number"
represents a forwarded-to number.
#41# Enable/disable call forwarding no reply. "number"
represents a forwarded-to number.
#60# Enable/disable call forwarding unavailable "number"
represents a forwarded-to number.
Use the command...
system-view
voice-setup
subscriber-line line-number
Remarks
-
-
-