Enabling The Vam Server; Configuring The Listening Ip Address And Udp Port Number; Configuring Security Parameters For Vam Pdus - 3Com MSR 50 Series Configuration Manual

Enabling the VAM
Server
Configuring the
Listening IP Address and
UDP Port Number
n
Configuring Security
Parameters for VAM
PDUs
To do...
Enter system view
Create a VPN domain and
enter VPN domain view
Follow these steps to enable the VAM server feature:
To do...
Enter system view
Enable the VAM Enable the VAM
server feature server for one or all
VPN domains
Enable the VAM
server for one VPN
domain
VAM employs the client/server model. Operating at the application layer of the
TCP/IP protocol stack, VAM uses UDP as its transport layer protocol.
Follow these steps to configure the listening IP address and UDP port number on
the VAM server:
To do...
Enter system view
Configure the listening IP
address and UDP port number
on the server
A VAM server listens to connection requests on only the specified UDP port.
Based on its authentication and encryption algorithm configuration, a VAM server
negotiates with a client to determine the authentication and encryption
algorithms to be used between them.
A VAM server dominates during an algorithm negotiation. When negotiating an
algorithm to be used, a VAM server first compares its algorithm of the highest
priority against the algorithm list of the client. If a match is found, the algorithm is
used. Otherwise, the server compares its algorithm ranking next by priority against
the algorithm list of the client.
Follow these steps to configure security parameters for VAM PDUs:
To do...
Enter system view
Enter VPN domain view
Configuring the VAM Server
Use the command...
system-view
vam server vpn vpn-name
Use the command...
system-view
vam server enable { all
| vpn vpn-name }
vam server vpn
vpn-name
server enable
Use the command...
system-view
vam server ip-address
ip-address [ port
port-number ]
Use the command...
system-view
vam server vpn vpn-name
1563
Remarks
-
Required
No VPN domain exists by
default.
Remarks
--
Required
Use either approach.
Disabled by default.
Remarks
-
Required
Not configured by default.
Remarks
-
-