Scheduling An Nqa Test Group - 3Com MSR 50 Series Configuration Manual

Scheduling an NQA
Test Group
To do...
Configure the number of
probes in a test
Configure the NQA probe
time-out time
Configure the maximum
number of history records that
can be saved in a test group
Configure the maximum
number of hops a probe
packet traverses in the
network
Configure the ToS field in an
IP packet header in an NQA
probe packet
Enable the routing table
bypass function
With this configuration, you can set the start time and time period for a test group
to perform the test and start the test.
Configuration prerequisites
Before scheduling an NQA test group, make sure:
Test parameters corresponding to a test type have been configured;
■
For the test which needs the cooperation with the NQA server, configuration
■
on the NQA server has been completed.

Scheduling an NQA test group

Follow these steps to schedule an NQA test group:
To do...
Enter system view
Schedule an NQA test group
Configure the maximum
number of the tests that the
NQA client can simultaneously
perform
Scheduling an NQA Test Group
Use the command...
probe count times
probe timeout timeout
history-records number
ttl value
tos value
route-option bypass-route
Use the command...
system-view
nqa schedule admin-name
operation-tag start-time
now lifetime forever
nqa max-concurrent
number
2029
Remarks
Optional
By default, one probe is
performed in a test.
Optional
By default, the timeout time is
3000 milliseconds.
This parameter is not available
for a UDP-jitter test.
Optional
50 by default.
Optional
20 by default.
This parameter is not available
for a DHCP test.
Optional
0 by default.
This parameter is not available
for a DHCP test.
Optional
Disabled by default.
This parameter is not available
for a DHCP test.
Remarks
-
Required
Optional
The default settings for this
command vary with device
models.