Table of Contents
Advertisement
2142
C
119: I
HAPTER
NFORMATION
Information Center
Configuration Task List
Setting to Output
System Information to
the Console
C
C
ENTER
ONFIGURATION
Table 70
for module name and description.
Between "module" and "level" is a "/".
Level (Severity)
System information can be divided into eight levels based on its severity, from 0 to
7. Refer to
Table 68
for definition and description of these severity levels. Note
that there is a forward slash between the levels (severity) and digest fields.
Digest
The digest field is a string of up to 32 characters, outlining the system information.
Note that there is a colon between the digest and content fields.
Content
This field provides the content of the system information.
Complete these tasks to configure information center:
Task
"Setting to Output System Information to the Console" on page 2142
"Setting to Output System Information to a Monitor Terminal" on page
2144
"Setting to Output System Information to a Log Host" on page 2145
"Setting to Output System Information to the Trap Buffer" on page 2145
"Setting to Output System Information to the Log Buffer" on page 2146
"Configuring to Output System Information to the SNMP NMS" on page
2146
"Setting to Save System Information to a Log File" on page 2147
"Configuring Synchronous Information Output" on page 2148
Setting to output system information to the console
To do...
Enter system view
Enable information center
Name the channel with a
specified channel number
Configure the channel
through which system
information can be output to
the console
Use the command...
system-view
info-center enable
info-center channel
channel-number name
channel-name
info-center console channel
{ channel-number |
channel-name }
Optional
Optional
Remarks
-
Optional
Enabled by default
Optional
Refer to
Table 69
for default
channel names
Optional
System information is output
to the console by default with
channel 0 as the default
channel
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
