3Com MSR 50 Series Configuration Manual page 1522

1522 C 79: MPLS L3VPN C
HAPTER ONFIGURATION
# Specify not to filter the received VPNv4 routes using the import target attribute.
[ASBR-PE1-bgp] ipv4-family vpnv4
[ASBR-PE1-bgp-af-vpnv4] undo policy vpn-target
# Configure both IBGP peer 2.2.2.0 and EBGP peer 11.0.0.1 as VPNv4 peers.
[ASBR-PE1-bgp-af-vpnv4] peer 11.0.0.1 enable
[ASBR-PE1-bgp-af-vpnv4] peer 2.2.2.9 enable
[ASBR-PE1-bgp-af-vpnv4] quit
3 Configure ASBR-PE 2
# Start IS-IS on ASBR-PE 2.
<ASBR-PE2> system-view
[ASBR-PE2] isis 1
[ASBR-PE2-isis-1] network-entity 10.222.222.222.222.00
[ASBR-PE2-isis-1] quit
# Configure LSR ID, enable MPLS and LDP.
[ASBR-PE2] mpls lsr-id 4.4.4.9
[ASBR-PE2] mpls
[ASBR-PE2-mpls] lsp-trigger all
[ASBR-PE2-mpls] label advertise non-null
[ASBR-PE2-mpls] quit
[ASBR-PE2] mpls ldp
[ASBR-PE2-mpls-ldp] quit
# Configure interface Serial 2/0, start IS-IS and enable MPLS and LDP on the
interface.
[ASBR-PE2] interface serial 2/0
[ASBR-PE2-Serial2/0] ip address 9.1.1.1 255.0.0.0
[ASBR-PE2-Serial2/0] isis enable 1
[ASBR-PE2-Serial2/0] mpls
[ASBR-PE2-Serial2/0] mpls ldp
[ASBR-PE2-Serial2/0] quit
# Configure interface Serial 2/1 and enable MPLS.
[ASBR-PE2] interface serial 2/1
[ASBR-PE2-Serial2/1] ip address 11.0.0.1 255.0.0.0
[ASBR-PE2-Serial2/1] mpls
[ASBR-PE2-Serial2/1] quit
# Configure interface Loopback 0 and start IS-IS on it.
[ASBR-PE2] interface loopback 0
[ASBR-PE2-LoopBack0] ip address 4.4.4.9 32
[ASBR-PE2-LoopBack0] isis enable 1
[ASBR-PE2-LoopBack0] quit
# Start BGP on ASBR-PE 2.
[ASBR-PE2] bgp 600
[ASBR-PE2-bgp] peer 11.0.0.2 as-number 100