Setting To Output System Information To A Monitor Terminal - 3Com MSR 50 Series Configuration Manual

2144 C 119: I
HAPTER NFORMATION
Setting to Output
System Information to a
Monitor Terminal
C C
ENTER ONFIGURATION
System information can also be output to a monitor terminal, which is a user
terminal that has login connections through the AUX, VTY, or TTY user interface.

Setting to output system information to a monitor terminal

Follow these steps to output system information to a monitor terminal:
To do...
Enter system view
Enable information center
Name the channel with a
specified channel number
Configure the channel
through which system
information can be output to
a monitor terminal
Configure the output rules of
the system information
Configure the format of the
time stamp
Enabling the display of system information on a monitor terminal
After setting to output system information to a monitor terminal, you need to
enable the associated display function in order to display the output information
on the monitor terminal.
Follow these steps to enable the display of system information on a monitor
terminal:
To do...
Enable the monitoring of system
information on a monitor
terminal
Enable the display of debug
information on a monitor
terminal
Enable the display of log
information on a monitor
terminal
Enable the display of trap
information on a monitor
terminal
Use the command...
system-view
info-center enable
info-center channel
channel-number name
channel-name
info-center monitor
channel { channel-number |
channel-name }
info-center source
{ module-name | default }
channel { channel-number |
channel-name } [ debug
{ level severity | state state }*
| log { level severity | state
state }* | trap { level severity |
state state } * ] *
info-center timestamp
{ debugging | log | trap | }
{ boot | date | none }
Use the command...
terminal monitor
terminal debugging
terminal logging
terminal trapping
Remarks
-
Optional
Enabled by default
Optional
Refer to Table 69 for default
channel names
Optional
System information is output
to the monitor terminal by
default with channel 1 as the
default channel.
Optional
Refer to Table 71 for the
default output rules of the
system information
Optional
By default, the time stamp for
log, trap and debug
information is date.
Remarks
Required
Enabled on the console and
disabled on the monitoring
terminal by default.
Required
Disabled by default
Optional
Enabled by default
Optional
Enabled by default