3Com MSR 50 Series Configuration Manual page 2143

To do...
Configure the output rules of
system information
Configure the format of the
time stamp
Table 71 Default output rules for different output directions
LOG
Output Modules Enabled/
direction allowed disabled
Console default (all Enabled
modules)
Monitorin default (all Enabled
g terminal modules)
Log host default (all Enabled
modules)
Trap default (all Disabled
buffer modules)
Log buffer default (all Enabled
modules)
SNMP default (all Disabled
NMS modules)
Log file default (all Enabled
modules)
Enabling the display of system information on the console
After setting to output system information to the console, you need to enable the
associated display function to display the output information on the console.
Follow these steps in user view to enable the display of system information on the
console:
To do...
Enable the monitoring of
system information on the
console
Enable the display of debug
information on the console
Enable the display of log
information on the console
Enable the display of trap
information on the console
Configuring Information Center
Use the command...
info-center source
{ module-name | default }
channel { channel-number |
channel-name } [ debug
{ level severity | state state }*
| log { level severity | state
state }* | trap { level severity |
state state } * ] *
info-center timestamp
{ debugging | log | trap }
{ boot | date | none }
TRAP
Enabled/
Severity disabled
warnings Enabled
warnings Enabled
informatio Enabled
nal
informatio Enabled
nal
warnings Disabled
debuggin Enabled
g
debuggin Enabled
g
Use the command...
terminal monitor
terminal debugging
terminal logging
terminal trapping
Remarks
Optional
Refer to Table 71 for the
default output rules of system
information.
Optional
The time stamp for log, trap
and debugging information is
date by default.
DEBUG
Enabled/
Severity disabled Severity
debuggin Enabled debuggin
g g
debuggin Enabled debuggin
g g
debuggin Disabled debuggin
g g
warnings Disabled debuggin
g
debuggin Disabled debuggin
g g
warnings Disabled debuggin
g
debuggin Disabled debuggin
g g
Remarks
Optional
Enabled on the console and
disabled on the monitoring
terminal by default.
Required
Disabled by default
Optional
Enabled by default
Optional
Enabled by default
2143