Configuring Security Calling; Displaying And Maintaining The H.323 Gateway - 3Com MSR 50 Series Configuration Manual

2362 C 136: H.323 C
HAPTER
Configuring Security
Calling
Displaying and
Maintaining the H.323
Gateway
ONFIGURATION
Configuration prerequisites
Complete the required basic H.323 gateway configurations except for the ras-on
command. (The ras-on command is used for initiating registration requests to the
gatekeeper after all configurations are completed.)
Configuration procedure
Follow these steps to configure a registration password:
To do...
Enter system view
Enter voice view
Enter gateway view
Configure a gateway
registration password
To let the gateway pass call tokens from the gatekeeper, you need to configure
security calling.
After a call is originated, the calling gateway obtains a call token from the calling
gatekeeper and transparently transmits it to the called gateway which will then
pass the token to the called gatekeeper. Tokens can be synchronized among
gatekeepers. Only after the called gatekeeper accepts the token can it return the
call accept message to the called gateway.
Configuration prerequisites
Complete the required basic H.323 gateway configurations except for the ras-on
command. (The ras-on command is used for initiating registration requests to the
gatekeeper after all configurations are completed.)
Configuration procedure
To do...
Enter system view
Enter voice view
Enter gateway view
Enable security calling
To do...
Display the registration state
information of gateway
Use the command...
system-view
voice-setup
gk-client
gk-security register-pwd
{ cipher | simple }
password
Use the command...
system-view
voice-setup
gk-client
gk-security call enable
Use the command...
display voice gateway
Remarks
-
-
-
Optional
Not configured and no password is
sent with registration requests by
default.
Remarks
-
-
-
Optional
Enabled by default
Remarks
Available in any view