Defining Traffic Behavior - 3Com MSR 50 Series Configuration Manual

Defining Traffic Behavior

Configuration example
1 Network requirements
Configure a class test_class. The rule is to satisfy the data packet with IP priority
to 6.
2 Configuration procedure
# Enter system view.
<Sysname> system-view
# Define a class and enter class mapping view.
[Sysname] traffic classifier test_class
# Configure classification rule.
[Sysname-classifier-test_class] if-match ip-precedence 6
To define a traffic behavior, you should first create a traffic behavior name and
then configure attributes for it in the new traffic behavior view.
Configuration procedure
Define traffic behavior
To do...
Enter system view
Define a traffic behavior and enter
traffic behavior view
QoS Policy Configuration
Use the command...
system-view
traffic behavior behavior-name
1643
Remarks
-
Required