3Com MSR 50 Series Configuration Manual page 2134

2134 C 118: B
HAPTER ASIC
C
ONFIGURATIONS
To obtain the desired help information, you can:
1 Enter <?> in any view to access all the commands in this view and brief description
about them as well.
<Sysname> ?
User view commands:
backup
server
boot-loader
bootrom
cd
clock
cluster
copy
debugging
delete
dir
display
......omitted......
2 Enter a command and a <?> separated by a space. If <?> is at the position of a
keyword, all the keywords are given with a brief description.
<Sysname> terminal ?
debugging Send debug information to terminal
logging Send log information to terminal
monitor Send information output to current terminal
trapping Send trap information to terminal
3 Enter a command and a <?> separated by a space. If <?> is at the position of a
parameter, the description about this parameter is given.
<Sysname> system-view
[Sysname] interface vlan-interface
<1-4094> VLAN interface number
[Sysname] interface vlan-interface 1 ?
<cr>
[Sysname] interface vlan-interface 1
Where, <cr> indicates that there is no parameter at this position. The command is
then repeated in the next command line and executed if you press <Enter>.
4 Enter a character string followed by a <?>. All the commands starting with this
string are displayed.
<Sysname> c?
cd
clock
copy
5 Enter a command followed by a character string and a <?>. All the keywords
starting with this string are listed.
<Sysname> display ver?
version
6 Press <Tab> after entering the first several letters of a keyword to display the
complete keyword, provided these letters can uniquely identify the keyword in this
command
Backup next startup-configuration file to TFTP
Set boot loader
Update/read/backup/restore bootrom
Change current directory
Specify the system clock
Run cluster command
Copy from one file to another
Enable system debugging functions
Delete a file
List files on a file system
Display current system information