Configuring Method Of Collecting Digits Of Called Number; Configuring Number Of Digits In Card Number/Password - 3Com MSR 50 Series Configuration Manual

n
Configuring Method of
Collecting Digits of
Called Number
n
Configuring Number of
Digits in Card
Number/Password
To do...
Enter system view
Enter voice view
Enter dial program view
Enter access number view
Enable the authorization function for
two-stage dialing users
The authorization function for two-stage dialing users is enabled for a specific
access number, while the authorization function for one-stage dialing users is
enabled in voice AAA client view
You can use the callednumber receive-method command to configure the
device to originate a call immediately all digits of a called number are collected or
after a dial terminator # is collected.
The configuration applies to the card number/password process, caller number
process, and caller number process with IVR.
Configuration prerequisites
You have configured an access number.
Configuration procedure
Follow these steps to configure the method of collecting digits of a called number:
To do...
Enter system view
Enter voice view
Enter dial program view
Enter access number view
Configure the method of
collecting digits of a called
number
If a user first dials the dial terminator #, the device will ignore it and will not
consider it as an error, and the user can continue to dial a number. This rule applies
to both card numbers and passwords.
For the card number/password process, it is necessary to stipulate the number of
digits in a card number/password. This facilitates user management and access
control.
Configuration prerequisites
You have configured an access number.
Use the command...
system-view
voice-setup
dial-program
gw-access-number
access-number
authorization
Use the command...
system-view
voice-setup
dial-program
gw-access-number
access-number
callednumber
receive-method
{ immediate | terminator }
Configuring Voice RADIUS
Remarks
-
-
-
-
Required
Disabled by default.
Remarks
-
-
-
-
Required
By default, users need to press
the dial terminator # after
dialing all digits of a called
number.
2417