Configuring Nonstandard-Compatible Mode - 3Com MSR 50 Series Configuration Manual

2392 C 138: V FR C
HAPTER O
Configuring
Nonstandard-Compatibl
e Mode
ONFIGURATION
To do...
Enter system view
Enter serial interface view
Enter interface DLCI view
Configure the VoFR CID
selection mode
Configure VoFR packets to carry a timestamp
Follow these steps to configure VoFR packets to carry a timestamp:
To do...
Enter system view
Enter voice view
Enter voice dial program view dial-program
Enter VoFR entity view
Configure a match template
for the VoFR entity
Configure VoFR packets to
carry a timestamp
Configuration prerequisites
Before configuring nonstandard compatible VoFR, complete the following tasks:
Configure POTS entities
■
Configure VoFR entities
■
Configure a call mode
Refer to "Configure a call mode" on page
Configure a call control protocol
Follow these steps to configure a call control protocol:
To do...
Enter system view
Enter serial interface view
Use the command...
system-view
interface serial
interface-number
fr dlci dlci-number
cid select mode { max-poll |
min-poll }
Use the command...
system-view
voice-setup
entity entity-number vofr
match-template
match-string
timestamp
2391.
Use the command...
system-view
interface serial
interface-number
Remarks
-
-
-
Optional
By default, CIDs are cyclically
selected in descending order.
Remarks
-
-
-
-
Required
By default, no match template
is configured for the VoFR
entity.
Optional
By default, voice packets do
not carry any timestamp.
Note that only the call control
protocol in the
Huawei-compatible mode
supports the timestamp
function.
Remarks
-
-