Hunt Group - 3Com MSR 50 Series Configuration Manual

3com msr 30-16: software guide
Hide thumbs Also See for MSR 50 Series:
Table of Contents

Advertisement

[RouterA-voice-dial-entity3000] quit
[RouterA-voice-dial] entity 1000 pots
[RouterA-voice-dial-entity1000] line 1/0
[RouterA-voice-dial-entity1000] match-template 1000
# Enable call hold and call transfer.
<RouterA> system-view
[RouterA] voice-setup
[RouterA-voice] subscriber-line 1/0
[RouterA-voice-line1/0] call-hold enable
[RouterA-voice-line1/0] call-transfer enable
2 Configure Router B.
# Configure voice entities.
<RouterB> system-view
[RouterB] voice-setup
[RouterB-voice] dial-program
[RouterB-voice-dial] entity 3000 voip
[RouterB-voice-dial-entity3000] address sip ip 20.1.1.2
[RouterB-voice-dial-entity3000] match-template 3000
[RouterB-voice-dial-entity3000] quit
[RouterB-voice-dial] entity 2000 pots
[RouterB-voice-dial-entity2000] line 1/0
[RouterB-voice-dial-entity2000] match-template 2000
[RouterB-voice-dial-entity2000] return
# Enable call hold.
<RouterB> system-view
[RouterB] voice-setup
[RouterB-voice] subscriber-line 1/0
[RouterB-voice-line1/0] call-hold enable
3 Configure Router C.
<RouterC> system-view
[RouterC] voice-setup
[RouterC-voice] dial-program
[RouterC-voice-dial] entity 3000 pots
[RouterC-voice-dial-entity3000] line 1/0
[RouterC-voice-dial-entity3000] match-template 3000

Hunt Group

Network requirements
Hunt group applies to the situation where multiple entities correspond to the same
number. When the voice subscriber line with the first highest priority is in use, the
device can automatically connect an incoming call to the voice subscriber line with
the second highest priority.
Telephone A1 (1000) and Telephone A2 (1000) are both connected to Router A,
and Telephone A1 has a higher priority. Telephone B (2000) dials the number
1000. Because Telephone A1 has a higher priority, Telephone B will be connected
to Telephone A1. If Telephone C (3000) dials the number 1000 after Telephone A1
and Telephone B are in a conversation, hunt group enables Telephone C to have a
conversation with Telephone A2.
Call Services Configuration Example
2441

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents