Fundamentals | Status displays
Icon
Meaning
The PARAXCOMP MOVE function is active
The order of icons can be changed with the optional
iconPrioList machine parameter (no. 100813). Only the
icon for control-in-operation (STIB) is always visible and
cannot be configured.
Additional status displays
The additional status displays contain detailed information on the
program run. This can be called in all operating modes except for the
Programming mode. In the Test Run operating mode, only a limited
status display is available.
Activating the additional status display
Display the soft key row for screen layout
Select the layout option for the additional status
display
In the right half of the screen, the control shows
the Overview status form.
Selecting an additional status display
Toggle through the soft key rows until the STATUS
soft keys appear
Either select the additional status display directly
with the soft key, e.g. positions and coordinates;
or
Use the toggle soft keys to select the desired view
Select the status displays described below as follows:
Directly with the corresponding soft key
Via the toggle soft keys
Or by using the next tab key
Please note that some of the status information
described below is not available unless the associated
software option is enabled on your control.
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
An active PARAXMODE or POLARKIN
icon hides the PARAXCOMP MOVE
icon.
3
71