HEIDENHAIN TNC 620 User Manual page 73

Fundamentals | Status displays
Pallet information (PAL tab)
The control displays this tab only if the function is active
on your machine.
Soft key Meaning
No direct Number of the active pallet preset
selection
possible
Program-section repeats and subprograms (LBL tab)
Soft key Meaning
No direct Active program section repeats with block
selection number, label number, and number of
possible programmed repeats/repeats yet to be run
Active subprograms with number of block in
which the subprogram was called and the label
number that was called
Information on standard cycles (CYC tab)
Soft key Meaning
No direct Active machining cycle
selection
possible
Active path and angle tolerances
Depending on which path and angle tolerances
are active, the following values are displayed:
Values of Cycle 32 TOLERANCE
Values defined by the machine tool builder
Active M functions (miscellaneous functions, M tab)
Soft key Meaning
No direct List of the active M functions with fixed functional-
selection ity
possible
List of the active M functions (adapted by your
machine tool builder)
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
3
73