HEIDENHAIN TNC 620 User Manual page 398

10
Opening VNC settings
To open the VNC settings:
Open the task bar at the bottom edge of the screen
Press the green HEIDENHAIN button to open the HEROS menu
Select the Settings menu item
Select the VNC menu item
The control opens the VNC settings pop-up window.
The control provides the following options:
Add: Add new VNC viewer/client
Remove: Deletes the selected client. Only possible with manually
entered clients.
Edit: Edit the configuration of the selected client
Update: Updates the display. Required with connection attempts
during which the dialog is open.
VNC settings
Dialog
VNC participant
settings
Firewall warning
Global settings
398
Option Meaning
IP address or computer name
Computer name
Connection of the client to the VNC viewer
VNC
The client participates in the focus assignment
VNC Focus
Type
Warnings and information about if the VNC protocol has not
been authorized for all VNC clients due to firewall settings on
the control.
Further information: "Firewall", Page 402.
Connection is always permitted
Enable TeleService
and IPC
The client must enter a password for verification. If this option
Password
is active the password must be entered when the connection is
verification
established.
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
HEROS functions | Window manager
Manual
Manually entered client
Denied
This client is not permitted to connect
Enable TeleService and IPC
Client via TeleService connection
DHCP
Other computer that obtains an IP address from this
computer