HEIDENHAIN TNC 620 User Manual page 74

3
Positions and coordinates (POS tab)
Soft key Meaning
Type of position display (e.g., actual position)
Axis positions
Spindle position
Depends on the
spindleDisplay machine parameter (no. 100807)
Tilt angle of the working plane
Angle of basic transformations
Active kinematics
Principal axes if they have been defined using the
PARAXMODE or POLARKIN function instead of the
standard XYZ.
Global Program Settings (POS HR tab)
Soft key Meaning
No direct Current values of Handwheel superimp.
selection
possible
The values of all other settings provided by the Global
Program Settings function are displayed on the GS tab.
Information on the tools (TOOL tab)
Soft key Meaning
Display of active tool:
Tool axis
Tool length and tool radii
Finishing allowances (delta values) from the tool
table (TAB) and TOOL CALL (PGM)
Tool life, maximum tool life (TIME 1) and
maximum tool life for TOOL CALL (TIME 2)
Display of programmed tool and replacement tool
74
Active coordinate system
With M118: always the machine coordinate
system
Selectable with GPS (Global Program
Settings)
Max. val. is defined by M118 or GPS
Max. val. and Actl.val. of the selected axes
Status of Reset VT value function
T: Tool number and tool name
RT: Number and name of a replacement tool
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
Fundamentals | Status displays