HEIDENHAIN TNC 620 User Manual page 348

9
9.7 Graphic settings
Use the Simulation parameters MOD function in the Graphic
settings group to select the model type and model quality operating
mode.
To define the graphic settings, proceed as follows:
Select the Graphic settings group in the MOD menu
Select the Model type
Select the Model quality
Press the APPLY soft key
Press the OK soft key.
The control saves the selected settings.
In the Test Run operating mode, the control displays the icons of the
active graphic settings.
In the Simulation parameters MOD function, the following settings are available:
Model type
Icon Choice
3-D
2.5 D
No model
Model quality
Icon Choice
Very high
High
Medium
Low
348
Properties
Very true to detail,
heavy time and processor consump-
tion
Fast
Very fast
Properties
High data transfer rate
Accurate display of the tool geometry
Block end points and block numbers can be displayed
High data transfer rate
Accurate display of the tool geometry
Medium data transfer rate
Approximation of the tool geometry
Low data transfer rate
Less accurate approximation of the tool geometry
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
MOD functions | Graphic settings
Application
Milling with undercuts,
Milling without undercuts
Line graphics